Lynda - Rhino 5 Essential Training 20...

Example files : not available
Video format : MP4
Video : AVC, 960x540 (16: 9), 15.000 fps, ~ 403 Kbps avg, 0.052 bit / pixel
Audio : 48.0 KHz, AAC LC, 1 ch, ~ 128 Kbps

Files (84)

02 Basic 3D Terminology/133324_02_03_3D15_meshes.mp412.62 MiB
02 Basic 3D Terminology/133324_02_01_3D15_entities.mp411.51 MiB
02 Basic 3D Terminology/133324_02_02_3D15_bezier.mp48.64 MiB
02 Basic 3D Terminology/133324_02_04_3D15_tolerance.mp414.16 MiB
14 Rendering Skills/133324_14_02_3D15_materials.mp424.77 MiB
14 Rendering Skills/133324_14_03_3D151_camera.mp430.08 MiB
14 Rendering Skills/133324_14_01_3D15_introduction.mp419.79 MiB
13 Documentation and Collaboration/133324_13_03_3D15_make2D.mp414.55 MiB
13 Documentation and Collaboration/133324_13_04_3D15_clipping.mp425.05 MiB
13 Documentation and Collaboration/133324_13_01_3D15_dimensions.mp415.67 MiB
13 Documentation and Collaboration/133324_13_02_3D15_captures.mp418.04 MiB
12 Modeling and Editing Organic Surfaces/133324_12_04_3D15_turtle_smile.mp422.27 MiB
12 Modeling and Editing Organic Surfaces/133324_12_02_3D15_turtle_body.mp458.97 MiB
12 Modeling and Editing Organic Surfaces/133324_12_03_3D15_turtle_helmet.mp421.58 MiB
12 Modeling and Editing Organic Surfaces/133324_12_06_3D15_turtle_finish.mp418.91 MiB
12 Modeling and Editing Organic Surfaces/133324_12_01_3D15_refresher.mp418.97 MiB
12 Modeling and Editing Organic Surfaces/133324_12_05_3D15_turtle_legs.mp422.08 MiB
04 Introduction to the Interface/133324_04_01_3D15_commands.mp415.34 MiB
04 Introduction to the Interface/133324_04_07_3D15_opening.mp421.31 MiB
04 Introduction to the Interface/133324_04_02_3D15_toolbars.mp421.67 MiB
04 Introduction to the Interface/133324_04_05_3D15_gumball.mp414.23 MiB
04 Introduction to the Interface/133324_04_04_3D15_feedback.mp417.56 MiB
04 Introduction to the Interface/133324_04_06_3D151_properties.mp411.95 MiB
04 Introduction to the Interface/133324_04_03_3D15_geometry.mp414.35 MiB
11 Analysis and Degrees/133324_11_03_3D15_rebuild.mp426.67 MiB
11 Analysis and Degrees/133324_11_02_3D15_degree.mp417.34 MiB
11 Analysis and Degrees/133324_11_01_3D15_analyze.mp429.25 MiB
01 System Setup/133324_01_03_3D15_interface.mp45.59 MiB
01 System Setup/133324_01_02_3D15_hardware.mp48.64 MiB
01 System Setup/133324_01_01_3D151_whyrhino.mp45.89 MiB
09 Modeling Aids/133324_09_04_3D15_planar.mp418.23 MiB
09 Modeling Aids/133324_09_07_3D15_smart.mp427.27 MiB
09 Modeling Aids/133324_09_01_3D15_modelaids.mp418.65 MiB
09 Modeling Aids/133324_09_06_3D15_cursor.mp414.52 MiB
09 Modeling Aids/133324_09_03_3D15_ortho.mp413.14 MiB
09 Modeling Aids/133324_09_02_3D15_grid.mp420.37 MiB
09 Modeling Aids/133324_09_05_3D15_osnaps.mp415.92 MiB
06 Drawing - 2D Geometry/133324_06_02_3D15_rectangle.mp416.83 MiB
06 Drawing - 2D Geometry/133324_06_04_3D15_freeform.mp417.19 MiB
06 Drawing - 2D Geometry/133324_06_01_3D15_lines.mp416.09 MiB
06 Drawing - 2D Geometry/133324_06_03_3D15_ellipses.mp421.21 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_07_3D15_subobject.mp420 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_01_3D15_solids.mp413.13 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_03_3D15_piping.mp432.29 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_05_3D15_troubleshooting.mp425.69 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_02_3D15_primitives.mp412.78 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_04_3D15_booleans.mp420.62 MiB
08 Modeling - 3D Solids (AKA Polysurfaces)/133324_08_06_3D15_points.mp418.9 MiB
05 Workflow Basics/133324_05_05_3D15_transforms.mp423.61 MiB
05 Workflow Basics/133324_05_01_3D15_preferences.mp413.11 MiB
05 Workflow Basics/133324_05_02_3D15_selecting.mp421.53 MiB
05 Workflow Basics/133324_05_06_3D15_namedpos.mp424.4 MiB
05 Workflow Basics/133324_05_04_3D15_cplane.mp426.8 MiB
05 Workflow Basics/133324_05_03_3D15_layers.mp422.25 MiB
Ex_Files_Rhino5_EssT.zip1.37 GiB
15 Prototyping/133324_15_03_3D15_manually.mp434.51 MiB
15 Prototyping/133324_15_01_3D15_preparing.mp418.37 MiB
15 Prototyping/133324_15_04_3D15_exporting.mp420.47 MiB
15 Prototyping/133324_15_02_3D15_automatic.mp411.19 MiB
07 Modeling - Basic Surfaces/133324_07_04_3D15_extrusion.mp425.81 MiB
07 Modeling - Basic Surfaces/133324_07_08_3D15_scn.mp442.34 MiB
07 Modeling - Basic Surfaces/133324_07_07_3D15_sweeps.mp427.42 MiB
07 Modeling - Basic Surfaces/133324_07_01_3D15_rules.mp437.93 MiB
07 Modeling - Basic Surfaces/133324_07_02_3D15_comparing.mp421.08 MiB
07 Modeling - Basic Surfaces/133324_07_05_3D15_lofting.mp427.62 MiB
07 Modeling - Basic Surfaces/133324_07_03_3D15_twotypes.mp417.76 MiB
07 Modeling - Basic Surfaces/133324_07_06_3D15_revolves.mp434.53 MiB
03 Navigation and the Help System/133324_03_01_3D15_splash.mp411.53 MiB
03 Navigation and the Help System/133324_03_04_3D15_panzoom.mp417.56 MiB
03 Navigation and the Help System/133324_03_02_3D15_viewport.mp417.74 MiB
03 Navigation and the Help System/133324_03_05_3D15_help.mp416.56 MiB
03 Navigation and the Help System/133324_03_03_3D15_shading.mp423.1 MiB
00 Introduction/133324_00_03_3D15_exercise.mp43.03 MiB
00 Introduction/133324_00_01_WX30_welcome.mp46.19 MiB
00 Introduction/133324_00_02_3D15_needtoknow.mp41.61 MiB
10 Editing and Transforming/133324_10_07_3D15_scaling.mp425.36 MiB
10 Editing and Transforming/133324_10_02_3D15_trimming.mp428.16 MiB
10 Editing and Transforming/133324_10_09_3D15_array.mp428.51 MiB
10 Editing and Transforming/133324_10_05_3D15_undo.mp416.49 MiB
10 Editing and Transforming/133324_10_04_3D15_copying.mp416.51 MiB
10 Editing and Transforming/133324_10_08_3D15_mirror.mp416.46 MiB
10 Editing and Transforming/133324_10_01_3D15_fillets.mp443.81 MiB
10 Editing and Transforming/133324_10_06_3D15_grouping.mp419.93 MiB
10 Editing and Transforming/133324_10_03_3D15_moving.mp436.14 MiB

Lynda - Rhino 5 Essential Training 2013

Continue browsing

Description

Files (84)